Technics 1200 turntable - no power Musical Fidelity AMP - no power Technics 1200 - if the mains cord connectors and fuses are ok - it could be the power switch - when you rotate the switch do any ...
technics 1200 i just aquired some technics 1200's when turning them on the light came on for a second then went off...i now cant get any power, i have replaced the fuse in the plug still no joy...any ...
...Technics SL-1200 turntable. Take the bottom off the turntable by removing the many screws in the bottom while the turntable is placed on a table upside down in front of you. After getting all those ...
technic 1200 just stopped hi my turntable worked fine then didnt next day ive seen a few other pages on here where the same has happend and ppl asked about fuses now the fuses are fine so wat do ...
No power. Last saturday I pressed the little button for the light to pop up. When it did, the entire turntable lost power and wouldn't turn on anymore. It's basically dead now. Even plugged in and ...
...1200 was sitting on the carpet for a week in arizona and now does not turn on? Check the fuse underneath the platter. You'll have to remove the protective cover to access this area. If your unit has ...
...technics Mk5 1200 in america, they woekerd just fine, they told me that they should work in europe with 220 v but when i plug one the red light when on and the i hear a clap and then nothing dead.. i ...
power switch not lighting and turntable wont work Most likley the 250mA fuse (F1) on the power input circuit board under the platter
technics 1200 mk5 is blowing a 125V 250 mA fuse on the board just after the transformer There must be a shorted power transistor in the power supply area. Check the voltage output of the transistor to
technics 1200 mk2 just powered down and wont come back on THERE ARE FUSES UNDER THE PLATTER AND BLACK COVER,REMOVE GLUE FROM AROUND REGULATOR DRIVER TRANSISTOR ON PCB.
Usually answered in minutes!
6,442 Questions
5,455 Questions
4,073 Questions
2,449 Questions
2,268 Questions