...liste to be found to acces Tech.RepMode function tree: Press Utility key and Stop - 0 -Stop - 0 - 0 - 1,touch Meter count windows on the touch panel,select tech.rep.mode,select counter,select
tech rep mode. Enter the tech rep mode by pressing the Meter Count key and hitting "Stop - 0 - 0 - Stop - 0 - 1" quickly. Then hit 7 and the start key. The administrator code will flash. You can write
...stop, zero, one Do not make any changes while in the service mode unless you are sure of what you are doing. I say this assuming you are not a service tech. Good Luck and Thank You for using
preventive maintenance time code:M2 just enterto tech rep mode stop 0 stop 1 then select funtion then find maintenance counter then reset the maintenance counter
...tech rep mode then counter-pm-pc life press the clear key to clear the counter value turn off the power. Open the right side door slide out the drum unit from the left and right side of the unit ...
...are the problems? Touch the Utility, Meter counter, Stop00 stop 01, now in service mode now stop 9 select copy kit counter then select mode 1 M-4 is set up to monitor what ever the tech wants it to ...
...tech rep mode i cant access tech rep mode in my bizhub 350. i already tried "12345678", "00000000" and "92729272" as what other suggest. Please help me.. Thank you in ...
...Tech.Rep.mode and acces the Consumables screen.Select the count of toner collect and press the clear key to clear the count.Place the copier in the Tech.Rep.mode by pressing the following ...
...mode (Minolta's Tech Rep Mode) Meter count, stop, 0, stop,1, or just stop 0 stop 1 select admin mode inside this mode you are currently in select administrator # input for password :) 4 digits ...
how to reset so how to reset the counters and the service tech mode Counter, Meter count Stop 00 stop 1 or stop 00 stop01
Usually answered in minutes!
106 Questions
93 Questions
72 Questions
71 Questions
72 Questions