Questions & Answers for: tear in seal

...seal need to be redone? most likley cause of your problem is the grey bellows has a tear in it. Inspect the bellows to check for tears. Or you can remove the lower panel and run the washer and look ...

...seal tear This machine is one year old (just beyond warrantee) and I noticed today that there is a considerable tear in the door seal (along with puckering and discoloration). I use all natural ...

...that has a tear in the door seal and now it leaks. Is there a way to fix the seal or do I need to get a whole new seal? My husband used super glue on the tear and for now the washer is not

...problem? If it is leaking from the front you may have a tear on the rubber door seal feel around the seal for a hole or tear.You will need a tech if there is a tear just did 1 today not

...seal has a small tear at 6 o'clock position can the seal be rotated to the 12 o'clock position? is so how? No. At the beginning of every cycle water enters appliance via top of door seal this is ...

HI my ge adora washer is leaking and it looks like the rubber rim has 2 small u shaped tears about 3/8" in it what can I do, You could try sealing the tears with silicon sealer, it might work, ...

...tear in the circular seal next to the door The seal has a groove that is caught on lips on both the drum and the body, detach the seal from the lips on both sides and carefully feed the new seal over ...

seal has a small tear at the bottom where the drain back hole are. Check the little holes around the drum, I have seen pins and needles get stuck in these and cause lots of damage. I would replace the

seal might have a tear or rip and is letting water leak past. The boot seal can be replaced. This part can tear when the washer is overloaded. This is common repair. Also check the drain hose and pump

...seal on door of my front load washer due to tear and not even 2 months later new one is torn again?? Please help What is causing the seal to keep tearing? It is an Electrolux brand if that helps The ...