Questions & Answers for: Oldsmobile tank fuel

Question about 1998 Bravada

1 Answer

...fuel tank, then disconnect the negative battery cable. If not done already, raise and support the rear of the truck safely using jackstands. If equipped on late-model vehicles, loosen and remove the ...

Ad

Question about 1998 Cutlass

3 Answers

...fuel tank completely. First, disconnect you negative battery cable, then remove the fuel filler tube that goes from the fuel filler door, to the fuel tank. Usually, there is a couple bolts by the gas ...

Ad

Question about 1996 Bravada

1 Answer

...fuel tank Run the fuel tank empty, if possible. The Jimmy's tank does not have a drain plug, but if the pump is still operating, then it is the only method of running the tank dry. An empty tank is ...

...fuel tank from the vehicle Remove or disconnect the following: Negative battery cable Quick-connect fittings at the fuel pump Fuel pump locking nut with a Fuel Pump Spanner Wrench J 39348 Fuel pump ...

Question about 2003 Silhouette

2 Answers

...fuel tank. it is located near the fuel tank and requires you to unbolt it. The Fuel pump in an Oldsmobile Silhouette is located in a plastic cylindrical module that also houses the fuel level sending ...

Question about 1992 Toronado

1 Answer

...fuel tank and has the fuel pump mounted in it. This requires the removal of the gas tank and then the fuel sending unit can be removed from the tank. REMOVAL AND INSTALLATION Fig. 1: Fuel pump unit ...

Question about 1999 Alero

1 Answer

...fuel tank.then then safely raise support car on jack stands. make sure sitting on solid level ground then remove the fuel charcoal canister hoses and vent line remove disconnect fuel pump. disconnect ...

Question about 1994 Ninety Eight Regency

2 Answers

...low fuel sensor is part of the fuel tank fuel level sensor, that sensor is located inside the fuel tank and is part of the fuel pump module. To replace it you must remove the fuel tank from the

...fuel tank straps to drop the tank. how do i disconnect the fuel intake assyembly? There should be under the seat an acess cover to remove hoses/wires from the assembly. IF not, then the tank should ...

...fuel tank and slightly tighten to tank, release tank straps and lower jack, roll out free from under vehicle and remove pump from tank, reverse process to reassemble. Suggest reference desk of local ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Oldsmobile Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...