Questions & Answers for: Husqvarna tangled thread

thread be tangled. Also, the bobbin could be threaded improperly in the shuttle hook. Rethread the bobbin in the shuttle hook. How to detangle a thread--- When a machine stops operation due to tangled

I have an Emerald 183 sewing machine.The bobbin thread is too loose. I can pull the top thread out no problem. I tried rewinding the bobbin thread, changing the needle and I do use the right settings ...

threading bobbin the machine was working fine  i took the bobbin out to add more thread  and the thread started tangling under the cloth   i tried retreading the bobbin several times ...

thread becomes tangled and knotted. I've cleaned and oiled the shuttle and cover and adjusted the tension, but it still happens. Advice? have you tryed changing the needle? have you tryed changing the

...thread from the bobbin side is a tangled mess when I stitch. The top looks fine, but the seam falls apart easily and the backside is all tangled. I cleaned underneath the bobbin holder but it didn't ...

...tangled. tryed to clean the bobbin case and under, stich is still tangling bad. Be absolutely sure that the machine is threaded correctly, with the upper thread clicked into the tension discs (the ...

How do I tighten the lower thread on my 5710 Husqvarna please? The lower thread is coming out profusely and tangling while the top thread is perfect. The material I am sewing is quite thin and ...

Machine Thread Bunching Up Here Why Why Do Get Bunched Up Thread Under My Fabric 8 Tips to Fix Birdnesting in Embroidery Why Is the Thread Getting Tangled Up Under My Material When Use My Sewing... ..

Husqvarna 6570 (37 years old)thread from the take up lever tangling around thread guide. I have changed needle, rethreaded and checked tensions. Help please in middle of quilting project. When you ...

Thread jams and breaks on my Husqvarna #1 machine. Thread looping around bobbin case This likely is related to thread tension. You might increase that adjustment a bit higher than the book settings. ...