...spin - the tail rotor pulls the heli in the opposite direction to compensate and keep it steady. Look at the angle of the main rotor in regard to the direction it turns - you'll see how it 'pulls' ...
Question about Airwolf Rc Electric Helicopter Body Fuselage Canopy
...around the tail rotor axis. I pulled the tail roter off and cleaned it out. After I put it back together it worked fine. I hope this helps. The tail rotor on a helicopter is what controls the
tail rotor to spin properly.. i had this issue and checked mine over very good, noticed the hair in tail rotor, and then took a needle to fish IT ALL out.. if u dont get it all.. it wont trim properly
tail rotor to spin properly.. i had this issue and checked mine over very good, noticed the hair in tail rotor, and then took a needle to fish IT ALL out.. if u dont get it all.. it wont trim properly
If the tail rotor does not spin then try lubricating the shaft with some talcum powder. To test whether it working blow down on to the rotor and it should spin rapidly. The talcum powder worked for me
...tail rotor on my Syma s107 metal series helicopter won't spin. the battery is fully charged. the top rotor still spins. i don't know what to do It seems tail motor is not working. S107 knows to come ...
...tail rotor wont spin It appears that the tail rotor holds the horizontal stability when going backwards. i.e. only works when command is backward. If the tail rotor does not spin then try lubricating ...
...tail spin I have changed my tail motor and now my heli (v200d02) spins uncontrollably when up throttle up. I brought 3 motors and all three do the same. I've replaced the whole tail assembly with ...
Question about World Tech 85618 2CH Silverlit Gyrotor X-Rotor RC Helicopter
...tail rotor will not spin? What can I do? Just had the same problem. The motors for for the lower rotor and tail need to be replaced. If it's anything like mine, you can use parts for Syma 107. ...
Question about WLToys V913 Large 4 Channel 27" RC Helicopter 2.4GHz
spin out of control. nose to left, tail to right. any suggestions? ive replaced main motor , pc board,tail motor. Maybe it's the transmitter? Is there a trim facility and if so does it do anything? If
Usually answered in minutes!
843 Questions
243 Questions
163 Questions
186 Questions
140 Questions