Questions & Answers for: Hummer H3 tail light assembly

tail light lens on 2008 H3 humr I am installing a rear back up camera system and need to remove the tail light lens to get to the wiring. Also, I need to know which wire is the 'back up light wire. Is

...tail light to replace it open the tailgate- remove the two screws on so that the tail light can slide out. Turn the bulb assemble and remove the bulb. Replace it and slide the lense back in replace ...

...tail light bulb? The process for replacing tail light bulbs is the same in all models. If you have a burnt-out tail light bulb, you may need to replace the brake light, the reverse light or the turn ...

the rear body about the center of the rear bumper ) the right side tail light wire is brown/white the left side tail light wire is brown, from the junction block to the tail lights both wires are blue

Passenger side tail light. Turn signal and brake light work but running light does not. Aftermarket LED tail lights installed but stock bulb also does not work. Change the bulbs only Change the bulbs

light works but the tail lamp does not come on There could be loose wire at the bulb socket ,A break in a wire, Or a bad ground, Or a short, Best way to have it solve is to take it into a auto eletric

...tail) or a earth wire (Plastic light units) and the other is a single contact that earths out through the metal base . If you have the wrong bulb in place the current will short directly across the ...

...a brake light on a h3 howdo you get to the ligt bulb Unscrew the tail light from inside the back of the car,the whole tail light will have to be removed to expose the globe holder from the ...

2007 hummer h3 tail light fuse location where is fuse for tail light located The fuse box cover has numbers that indicate where the individual fuses are located in the fuse box

how to take out tail light cover on passenger side open tail gate and carefully open all visible screws and there u go