Questions & Answers for: Dodge Ram 1500 tail light assembly

...tail light? I do not see any screws on the outside nor any access from the truck bed. Thanks. There should be two screws on the inside edge of the assembly, one next to top lense and one next to ...

...tail light How do you remove the tail light lens to replace a bulb? Drop the tailgate - there are two torx style bolts holding the lens assembly in place. Remove both, then with some gentle force, ...

light has gone out. I bought it used. Does the cover come off or do I have to access it from the tailgate side? you have to let the tailgate down and take the screws out of the lense assembly then the

tail light out on drivers side of 2001 Dodge pickup truck 1500 How do you remove cover over tail light open the tailgate and there are 2 screws that hold the whole assembly in...remove the assembly ...

...tail light assembly how to remove tail light from 2003 dodge ram. I took the screws out, but feels like there is a clip or something still holding it in. I don't want to break it. please help me get ...

tail light assembly come out after you remove the 2 screws on the tail gate side? assembly or just the light cover? The light cover should come off once the two screws are off. The assembly it self is

tail lights on the driver side only do not work I have a 2007 Dodge Ram 1500.The lights on the passenger side work fine The wiring of the harness is parallel to the sides. hence you will need to trace

...tail light lens on the 2001 Dodge Ram 1500 there are 2 screws on the outside of the lense assembly and when you open the tailgate and look there are 2 screws on the inside of the assembly that you ...

...tail light assembly is broken and filling with water enough to create a short to ground. If there's no broken lens, whitch normally only blows the bulb. Then, the problem lyes in the trailer light ...

...tail light assembly I assume that is a typo and should read "wiring." As I see it, there can only be two possible explanations. 1) Electrical or 2) Coincidence. Regarding electrical, if this is the ...