...Tail light connector and see if make any different. If the lights work ok. you can LEAVE with the Ground. Or try to find where is the wire cut. or in missconntact. OK... I hope this help to try ...
...tail light assembly. Also I had to get a new pair of rails for the rear tail lights (the black rectangle-ish assembly on the back of your tail lights that the bulbs go into. The rear rails got fryed ...
...tail light assembly remove the light and seperate the back like when you changed the bulb. there were 2 disigns one with metal lines going to the sockets check for rust/corrosion this will cause a ...
...tail light assembly. Check the connector at the light and the bulb sockets. You will find a bad connection for the power or ground. Also.....while you are there.....add a ground from the bad light to ...
...tail light assemblies take the tail light apart just the sameas you would to change the bulb now check the METAL BAR THAT GO TO THE SOCKETS if they are RUSTED then they need to be replaced the rust ...
...tail light assemble, check fuse 18 just inside the drivers door behind the small panel near the dash. My has blown a few times when the weather is damp. I believe my blows due to a dirty trailer plug ...
...tail light assembly and pull it out, twist BKUP light socket and pull bulb out. I suggest you by replacement bulb before doing this so you don't have to do the job twice. Don't forget to rate this ...
Are the 1988 and 1990 chvy c15oo tail light assembly interchangable? They also kept making the older style pick up in 2000, those light will fit. The newer style lights won't.
Replaced driverside rear brake light it works until the tailight assembly is srewed back in to the truck and then it won't work You need to replace the tail light board. AKA what the bulbs go in to.
Usually answered in minutes!
584 Questions
420 Questions
403 Questions
331 Questions
284 Questions
