some and loses contact so doing this gets the contacts points back. if it works for you as well you can get a new tail light assembly or just tape it in place.. Ebay had some after market lights cheap
fuse works these lights....the bulbs are new... tail light fuse and brake light fuse, and they are marked, if they are good then you have a bad light switch or a bad turnsignal switch assembly harness
I cannot find a left rear tail light assembly for my 88 Plymouth reliant, any suggestions?? Try doing an internet search for online junk yards I have had some luck there
...tail light fuse with a test light and it was good,remove one tail light assembly and check for power before socket with a test light and parking lights on,if no power replace headlight switch,if you ...
...light realy isn't working. all fuses replaced. there was a clicking noise from the fuse box and the tail lights and dash lights went off. wiggled the relay and it turned back on, now they are off ...
...for replacing tail lights fuse. Thank you very much Open trunk. Remove the threaded wing nuts on each tail light assembly. With the wing nuts off, pull the entire assembly out to exposed the
tail light? In the trunk directly behind the tail light pull the carpet back and there are three twist off plastic nuts take them off then pull tail light straight out toward the rear. If you are just
Usually answered in minutes!
758 Questions
706 Questions
609 Questions
602 Questions
526 Questions