Questions & Answers for: Oldsmobile tail light assembly

...TAIL LIGHT BULBS ARE BLOWN, DO YOUR TURN SIGNALS FLASH FASTER THAN NORMAL ? IF SO IT IS FOR SURE THE REAR BULBS. TO REPLACE THE BULBS,LOOK IN THE TRUNK,& YOU WILL EITHER SEE SOME BLACK T HANDLE ...

Ad

...Tail Light for arcing and corrosion. (The female pin is in the vehicle harness connector and the male is part of the Lamp Holder Assembly.) If found, because the male connector is part of the Lamp ...

Ad

Question about 2000 Bravada

1 Answer

...tail lamp assembly to the vehicle. Tail lamp assembly removal Rotate the bulb sockets 1/4turn counter-clockwise in order to remove the bulb sockets from the tail lamp assembly. Remove the bulbs from ...

Tail light burned out. How to get tail light cover off to replace it? There are 2 screws holding the light assembly. You need a special star shaped screw driver to take them out. Then the assembly ...

light, the tail light or the backing up light? Neither it only comes on when brakes applied. They often fail, and have a seperate fuse, check first. If fuse good and you have power and ground to light

Question about 1988 Delta 88

1 Answer

tail light panel screws and the lens assembly. You can now simply turn the bulb connector assembly counterclockwise and remove it from the lens housing. Fig. 8: Once the carpet is pulled down, you can

...tail light bulb burnt out how do I get into the light bulb to change it behind the lining in the trunk there are plastic wing nuts, take them off and the light assembly comes out, you will be able to ...

tail light electrical connectors are fried, i need to replace the connectors cant find them online? help Call your local junkyards to see if any of them have any Silhouettes in their ...

...cluster lamps.If by "rear lights" you mean everything in the rear lamp assemblies, power for the tail lights (running lights) starts at the 15A PARKLAMP fuse in the underhood junction block,

tail light lens broken in Oldsmobile silhouette 1999. Does the whole assembly need to be changed You can replace just the outer shell, but suggest replacing the inner circuit board also.

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Oldsmobile Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...