Question about 42EDT41 42 in. HD-Ready Plasma Television
...how I can fix it???? Usually it is the Y-sus that has the problem. This is one of the boards that sustain the picture on the screen. For this particular issue, there could also be issues with the ...
Question about 42EDT41 42 in. HD-Ready Plasma Television
...when your plasma goes pop but there is sound and no picture The pop you heard was probably the Y-sustain board. The "sound, but no picture" problem is common for plasma tv's. I fixed mine buy ...
Question about 42EDT41 42 in. HD-Ready Plasma Television
...image. POssible problems/solutions? Thank you! This is a common plasma tv problem. I changed the Y-sustain board and the Z-sustain board and that fixed my "sound, but no picture" problem. You can ...
Question about UltraVision 55HDS69 55 in. Plasma TV
...board on the left that feeds into 2 other smaller boards left of that. The big board is called a Y sustain board, and the 2 little boards are called buffer boards. My bet is that one, two, or ...
I have a hitachi 42edt41a that has sound but no picture. I have heard that it may be a y sustain board. if so where do I get one Try www.shopjimmy.com Look for fuses on the sustain boards (both Y and ...
...to turn it on Hello williams6590, Welcome, and thank you for using FixYa! Your problem is the X-Sustain Board. There are a large number of componants and connections on this board. I recommend ...
Question about 55HDS69 55 in. Plasma Television
Was watching tv picture went out just have sound Hello, Problem is in either power supply or the Y-Sustain board. The Y-Sustain is a relatively large board out of which go connections to the side of ...
Question about 55HDS69 55 in. Plasma Television
...LCD TV then I would check the backlight inverters. If it's a Plasma TV then The Sustain boards there are two sustain board.You can get parts for this TV at ...
Question about 55HDS69 55 in. Plasma Television
...40 secs or so it displays "power saving" and then shuts off. i suspect the y sustain board ??????? yesthe sustain board should be replaced when the Buffers are replaced ...
...are slotted connectors on all four sides, while T-CON boards have connectors on just two sides. X-Sustain and Y-Sustain Boards Also known as the X-SUS and the Y-SUS, the x-sustain and y-sustain ...
Usually answered in minutes!
727 Questions
631 Questions
405 Questions
415 Questions
357 Questions