Questions & Answers for: suction valve

Question about CV353 Central Vacuum

1 Answer

...suction at this valve? If not, disconnect the inlet piping and check the suction directly from the inlet. Make sure the utility valve is closed while checking the suction on the inlet. If you have ...

Ad

Question about BARRACUDA G3 IN-GRND CLEANER

1 Answer

...suction when the valve is in "filter" mode First thing to check is the removal of any winterizing plugs in the return lines. Sometimes plugs are fitted inside the lines in the pool making them not ...

Ad

Question about SAND FILTER, PRO SERIES

1 Answer

...valve on the suction side of the pump is pulling water from the pool instead of the spa. Also, if you have a separate skimmer and main drain valve on the pool suction, make sure the skimmer valve is ...

Question about SAND FILTER, PRO SERIES

1 Answer

...suction on the ball valve. The ball valve has to be the right size. Too large, no suction, too small, no suction. The entire world of electronics is based on similar principle. When the ball valve ...

Question about Kreepy Krauly In-Ground Pool Cleaner

1 Answer

...do not have a skimmer valve I would recommend installing an inline PVC valve in the suction hose close to the skimmer so that it is accessible. Close the valve slowly until proper suction is

Question about Kreepy Krauly In-Ground Pool Cleaner

1 Answer

suction port with a valve on each line then tie all back into a single line then into suction side of pump then pipe return side of pump back to the return ports of pool installing a valve as you come

...valve to two suction passages together in the collector. Under this condition, the effective port length is equivalent to the length of the suction port provided independently for each cylinder. This ...

Question about Pacer Pool Cleaner

1 Answer

suction reducer pool pump has too much suction add a valve to hose and turn down suction Adding a valve will burn out the pump. open the pump housing maintaince panel and adjust per owner manual

...Suction control valve malfunction • Connector or terminal malfunction • Short to ground in wiring harness between suction control valve terminal A and PCM terminal 10 • Short to ground in wiring ...

Suction Control Valve Stuck https://www.troublecodes.net/pcodes/p0089/ https://www.milneroffroad.com/what-is-suction-control-valve-failure- https://tr-cam.com/video/nNmwuyAiG1o/2009-mitsubishi-montero

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Vacuums Experts

AskDyson
AskDyson

Level 3 Expert

2572 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Anonymous

Level 3 Expert

43501 Answers

Are you a Vacuums Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...