Questions & Answers for: Chevrolet Tahoe subaru code po442

Question about 2004 Tahoe

2 Answers

Service 4WD Light comes on. What exactly do I need to do? have a dealer read the codes from the atc module..if has code 327 it will need an encoder sensor replaced..if code 2735 it will need a switch ...

Ad

how do you reset the check engine light? 2003 chevy tahoe Check engine light came on for a reason. Could be one of a hundred reasons. My adivce would be to go to Advance Auto, O'Reilly's or any of the

Ad

Question about 2003 Tahoe

3 Answers

My 2001 chevy tahoe's check engine light came on and the gauges quit working and it wouldn't shift right. I put a OBD2 reader on it and it gave me the following error codes: po 740, po 785, po753, ...

Question about 2003 Tahoe

2 Answers

...po442 code on a 2007 Chevy Tahoe p0422 is a small leak in what is called your EVAP system basicly its the pressure that is held inside the fuel tank its an emissions thing there two valves one by the ...

2005 chevy tahoe died while driving down highway, engine rich code? it has had a knock sensor code, just have not had time to fix it. only other symptom is the rich code, i was not there so i don&

Question about 2001 Tahoe

1 Answer

po442 keep on popping up p0442code is (evaporative emissions control system. small leak detected) check vacuum hoses and connections

Question about 2002 Tahoe

1 Answer

...code po442 po442 is a small leak detected in the evap system, look for any broken or disconnected hoses, or a leaking gas cap, that is about as far as your going to be able to get at home with out a ...

97 chevy tahoe running rough update.... has codes P0141 and a Code P0303, which would cause the shake if not both? it has new plugs and wires but still misfire on #3. what should I look at first for ...

Question about 1999 Tahoe

1 Answer

I need code radio, factory:182184 code radio, factory:182184 Hold preset buttons 2&3 and 1&4 for approx. 10 whole seconds. The HU displays LOC, and a 3-digit code. Write this down. Remove the ...

why the loss of power and po300 code? had code p0300 random miss. changed lower & upper manifold gaskets, plugs wires, cap & rotor. fuel pump, pressure correct, fuel filter,..tested spider injectors &

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...