Questions & Answers for: stuck on bulb

Question about 2004 Grand Am

1 Answer

...bulb stuck 2002 grand am brake/turn signal bulb is stuck in the mount. I moved the small holder tabs on both sides of the bulb but it still won't slide out. the bulb base is brown -not black. Did it ...

Ad

Question about EOS 450D Digital Camera

2 Answers

stuck on bulb When my camera is in manual shooting mode, the shutter is stuck on bulb. Help! Never mind, I fixed it. Thanks. I know this is an old post but may I ask how you fixed it? Mine is stuck on

Ad

...stuck on when head light is on. Remove the front turn signal bulb for the left side. There is a plastic lever if you look closely, push down the plastic lever and push forward and the lamp housing ...

...STUCK ON (all 3) - ONLY WHEN LIGHTS ARE ON!!! Otherwise brake lights work fine, Also when i brake (with lights off) my front passenger sidelight comes on, as too do the dash lights heeeelllppp, hi, i ...

Question about Spacemaker JVM1740 Microwave Oven

1 Answer

bulb metal part is stuck in socket This is pretty common and can be a pain. It's tacked in place with contact cement or hot glue, and sometimes there may have been enough moisture to corrode and seize

Question about Spacemaker JVM1740 Microwave Oven

1 Answer

stuck freezer blown bulb that How do I remove a stuck freezer blown bulb that will not be moved when attempt is made to unscrew it? use a hair drier to warm it up, then wrap a small cloth around it to

Question about Spacemaker JVM1740 Microwave Oven

1 Answer

...bulb stuck. The glass top of the bulb has come away. Cannot get the remaining bit unscrewed due to access. Is it difficult to take the inner panels of the oven out to get better access to the bulb ...

Question about Amana 30 in. Electric Double Wall Oven with Temp-Assure Cooking System

1 Answer

Stuck oven light bulb The bulb in the top oven is burned out and totally stuck. It isn't broken (yet) and all the answers I've read involve straps or duct tape, and those don't work since ...

...bulb is still stuck in. What is the problem, Is the carb. stopped up should I put a kit it the carb.? I also sprayed crab. cleaner in it. Something is stopped up not letting the primer bulb come back ...

stuck in socket Dear Friend, If something like that happens to me, I will take a needle nose pliers and go around the socket opening the metal wall that holds the bulb and pull the bulb out. Make sure

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...