how to install front struts on a 2002 Dodge Intepid , is there any special precautions needed in installing these struts? There are 7 bolts that hold the struts on the Dodge Intrepid. 4 are located ...
replace rear struts on a 96 dodge intrepid I suggest QuickStruts (r). Unless you have a spring compressor, they're the most user friendly. They come in the box as a ready to go, one piece, assembly. ...
how to chnge control arm bushing on 1994 dodge intrepid Here are the instruction on how to replace your control arm bushing. please not that there is a special tool needed that you will need to get ...
The hood want stay up, it was repaced but still want stay open. Did you replace hood struts or entire hood? Sounds like hood struts need replaced. hood struts are pricey, use a vice grips on strut rod
my tire is rubbin some where and the vehicle look low on he drivers side sounds like eithor you have a caliper that has popped loose or you need a new strut and it is rubbing against the strut itself
how to remove front axle on a 2002 dodge intrepid raise you vehicle on jackstands. remove front wheel and tire.remove front caliper from steering knuckle assembly, remove rotor from hub by pulling it ...
...the whole assy out. Then you can take your new ones and old ones to some one and let them change struts out or you can go to your local parts store and rent some strut compressor and do it your ...
how adjust struts on my 1998 dodge intrepid should be done by a shop on a alignment machine, basically you just loosen the 2 big bolts on the hub that hold the strut to it, failure to do it properly ...
link from strut to idler arm The arm with bushings on both ends that from the strut down to the idler arm Question?
torque specs for struts dodge intrepid replacing strut. need torque specs Call the auto parts place that you purchased the struts from.
Usually answered in minutes!
1,166 Questions
867 Questions
924 Questions
766 Questions
627 Questions