Questions & Answers for: stove outlet working

...outlet for stove top burner cartridge Jennair SVE47600W How do I take apart the top of the stove so that I can replace the outlet that the stove top burner cartridge plugs into? Also, what is the P/N ...

...outlet and it is also live. One day the stove and oven worked and the next it did not. I can manually ignite the burners. I've not tried to manually ignite the stove. The clock also is also off and ...

...outlet. There is no direct shorts. Would work when bypassed GFI. but not for long. Now nothing and gfi replaced. Stove fried last one. Stove running for 18 months the manufacturer recommends a 15 amp ...

...power, if not, check the main breaker in the breaker box, you may have to turn the breaker to the off postion and then back to the on postion, if power is going to the outlet your stove should

...of them is blown. If that is not the case then one of the wires has come loose either in the service panel or in the outlet behind the stove. Use a multimeter to check the input voltage at the

...stove outlet. Any idea? Morison, The same thing happened to me about a week ago. I was preheating our electric oven, heard a very loud bang/pop. Checked and the oven had PF (power failure) I went ...

stove. I need to know where the red, black, green and white wires go. First try using same order as in old cord did not work. Can you please provide wiring diagram of wiring order. How to wire 240volt

...stove outlet. Sometimes one of them could be tripped off causing this same problem. Reset both breakers for your stove regardless (If resetting your breaker fixes the problem but it trips again, have ...

...outlet on the stove top work The outlet on the stove top does not work. It is an older model of Frigidaire 2004, with the flourescent tube on the top. It has a socket which looks like it might need a ...

...outlet on your Hotpoint built-in electric stove: Check the power source: Make sure the stove is properly plugged in and that the circuit breaker is on. If there's still no power, try resetting the ...