Questions & Answers for: stove locked door flashing

...locked....range will not work. Cannot get it to stop flashing even after unplugging for 15 minutes. Any suggestions? Look for a microswitch connected to the lock mechanism at the back of the stove. ...

...stove started beeping and flashing f9 and the door is not locked could you help me F9 Problem with door lock circuit such as pinched wire between Electronic Range Control (ERC) and door lock ...

STOVE CODE FLASHING WHAT IS CODE F9-3 MEAN ON MY STOVE f9 depicts a door lock error 3 specifies the latch lock lower sensor

Stove door locked and continues to beep and flash code F9 I started a self-cleaning and decided after an hour it was taking to long so I cancelled the clean. The door is locked and it continues to ...

...stove. Not only did it not clean but the Door locked button has been flashing for 2 weeks. Everytime I go to cook and it the Bake, Broil key it flashes DR then F9 I h I hit the "clean " button on my ...

...stove/oven. the other day, i pushed the self clean button and the light for the door lock keeps flashing. then it beeps with a f90 code. it never would clean but leading up to that, the oven works ...

door could lock. NOw my stove keeps flashing F90 and Door Open and I can't do anything!The stove is only a year old! We tried unplugging the stove but that didn't work either. Hmmmm, look up what that

...stove.I accidentally hit the clean button and opened the door but the latch had locked now I cant close door and oven wont come on and it just keeps flashing loccked.It doesnt look like there is a ...

...cooled down the door should release again. If this does not work try turning the power off to the stove (breaker) This should reset the stove to normal. Call a repair man if this continues. Good

...circuit on power relay board sensed Replace power relay board JENN AIR Range/Stove/Oven Fault Codes Fault:F9 Condition: Door latch supervisory Check door lock circuit or replace clock assembly or ...