Questions & Answers for: Whirlpool Cabrio stop switch

Ad

Question about Cabrio WTW6600SBT Top Load Washer

1 Answer

...stop and start same thing. It sounds like the lid switch is bad.Does it act as if the lid is open even when closed? A common problem is that its mounting method fails (breaks off) after some time. ...

Ad

Question about Cabrio WTW6600SBT Top Load Washer

1 Answer

error code HC occasionally i get an error code HC. What does this mean I recently started getting this message as well. I found out that I accidentally switched the hot and cold water lines into the ...

Ad

Question about Cabrio WTW6600SBT Top Load Washer

1 Answer

broken door sensor switch my whirlpool topload washer was stopping right before the spin cycle, after pressing the door switch down it would start up and finish the cycle. Now that switch has cracked ...

Question about Cabrio WTW6600SBT Top Load Washer

1 Answer

during spin cycle it becomes unbalanced and it beeps and stops during spin cycle it becomes unbalanced and it stops. A repairman replaced a lots of things but it keeps on doing the same thing. How do ...

Question about Cabrio WTW6600SBT Top Load Washer

1 Answer

Washer stops working after 1 minute and an F flashes Hi, The error indicates that there is no water detected entering machine or Pressure switch trip not detected..If after 30 seconds the control does

Question about Cabrio WTW6600SBT Top Load Washer

1 Answer

My whirlpool 9600 washer displays F35 error code and stops. Where can I find the manual to understand what F35 is? Thanks. F35 is a water level error. The water level switch (pressure switch) has ...

Question about Cabrio WTW6600SBT Top Load Washer

1 Answer

..."oL" This happens when the washer goes to spin cycle on regular wash, and the washer stops and will not spin, but if short cycle the washer will spin and runs till completed. Hi Error ...

Question about Cabrio WTW6600SBT Top Load Washer

1 Answer

stop it manually ok ut this will work till you get a replace ment part normally aroumd 30 dollars and fairly easy to replace Lid Switch Assembly Item # 2927 Washing machine lid switch assembly Related

Question about Cabrio WTW6600SBT Top Load Washer

1 Answer

washer stops at rinse cycle and give the ul code F1 see this causes and fix it. God bless you Lid Switch Assembly If the washer stops mid cycle the lid switch assembly might be defective. This is a ...

The dryer begins to run and then stops although the digital timer is still on as well as the other lights. What can I do? There was also an odor in the room. There is a switch in the motor that causes

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...