Questions & Answers for: Cadillac Escalade stop switch

I have a 2000 escalade. I have an intermediate problem with the power windows, radio and wiper that stops working at the same time. I had the same problem... Its the bcm or body control module. Its ...

2000 escalade windows and radio stopped working at same time,,.. checked all fuses and switches they all seem to be ok' Look under the hood and try testing ALL fuses first, then try swapping out two ...

...kicks on and of ...only runs for 5-9 seconds...then disengages the clutch on the pump and stops spinning...?? what to do? You need to double check the refridgerant charge - system holds ...

...happen they do leak and eventually they stop giving you cold air. There is a low pressure switch that protects the compressor from damage. hopefully you just need a charge and everything will be ...

...stop, until they are turned back on and run for short length of time. Is is an owner replaceable problem? I had an older car with the same problem. it is most likely the combination switch on ur ...

interior courtesy lights just stopped coming on when the doors are opened (no matter if the engine is on or off). ?? is the switch turned off?

stop working. Turn the engine off and restart engine and the items usually start working again. Do all these things quit working at the same time? If so, I would be looking at my main power circuits -

STOP LITE SWITCH LOCATION ON 1999 CADILLAC DEVILLE BREAK WON;T COME ON the switch is located at the base of the brake pedal near the fire wall.if you look under the dash and watch the pedal as you ...

...stop lamp switch. When the driver presses the brake pedal, the switch contacts close and battery positive voltage is supplied to both the STOP 15 A fuse and the CHMSL 10 A fuse in the I/P fuse block, ...

...stop lamp switch is used to sense the action of the driver application of the brake pedal. The body control module (BCM) provides a low reference signal and a B+ reference voltage to the stop lamp ...