Questions & Answers for: Cadillac stop switch Cars & Trucks

Question about 1997 DeVille

1 Answer

stop HI, you will need to check the resistor switch in this case. you can use a multimeter to test the resistance of the switch. if the reading are not sufficient, replace the switch. if the switch is

Ad

...stop until I turn switch back it don't spring back. But if it starts switch work like suppose to. Can you give me any help what it is a how to check. Oh! and no engine light coming on and we had ...

Ad

my sunroof stopped working on my 2001 cadillac catera I just need some ideas of why it has stopped. first check fuse if fuse okay see if power going to control switch if  yes the sunroof motor ...

with a buzzer sound May want to have to oil pressure checked and check the oil pressure switch for signs of leaking. If the switch is loosing signal then the ECM triggers the stop engine warning light

stop lamp switch signal circuit. The ground for the CHMSL is applied from G402. The turn signal/hazard flasher module then supplies voltage to the left and right stop lamps in the tail lamp assemblies

Question about 2007 CTS 3.6L

1 Answer

...stop light switch,that switch is attached to your brake pedal. http://www.engine-light-help.com/cadillac-check-engine-light.html Here's another link to what the stop light switch look's like.First ...

...stop lamp switch. When the driver presses the brake pedal, the switch contacts close and battery positive voltage is supplied to both the STOP 15 A fuse and the CHMSL 10 A fuse in the I/P fuse block, ...

...stop lamp switch is used to sense the action of the driver application of the brake pedal. The body control module (BCM) provides a low reference signal and a B+ reference voltage to the stop lamp ...

...stop unless I take fuse out. Wiper motors have a park position switch mechanism built into them that when it goes bad it will not stop . A good used one may be an affordable option . Test the power ...

...stop lamp switch. When the brake pedal is pressed, the stop lamp switch contacts close and battery positive voltage is supplied to the center high mounted stop lamp (CHMSL) and the turn signal/hazard ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...