Questions & Answers for: stk panasonic

Question about PT-53WX42 53" Rear Projection Television

2 Answers

...panasonic is 814 source and the number on the ic's stk 390 ----/ I replaced the Convergence IC Chip STK392-110 for my PT-53WX42 Panasonic HD Rear Projection TV but I found burnt resistor(resistor ...

Ad

Question about PT-61HX40 61" Rear Projection Television

1 Answer

...stk # finding the resistors you might try calling panasonic to find the part #by telling them the location of the burnt resistor. good luck. mind you that the soldering of the stk (semi-conductors) ...

Ad

Question about PT-47WX49 47" Rear Projection Television

1 Answer

Panasonic Projection TV PT-47WX49E convergence ... Today my red convergence has gone askew. Could someone e-mail a service manual to my [email protected] address. I'm hoping to resolve this ...

Question about PT-47WX49 47" Rear Projection Television

1 Answer

...Panasonic PT-51HX40B. I replaced the STK-392-110's with no change in convergence. I ordered and installed Sanyo STK-394-160's with still no convergence. I checked all of the 20-ohm 1/10w resistors, ...

Question about PT-47WX49 47" Rear Projection Television

1 Answer

...warped like an Arch. You can still see a picture and sound. What my husband wants to replace is STK clips and resistors... Advice? yes the STK ICs need replacing. Most panasonics use STK392-110 ...

Question about PT-51G54 51" Rear Projection Television

1 Answer

...Panasonic PT 51G65CA and how much will it cost? London, ON and is this a repair I can do myself?? Look for 3 black things about the size of 2 matchbooks on a big heat sink. The part will begin with ...

Question about PT-51G54 51" Rear Projection Television

1 Answer

I have a Panasonic 53" projection tv approx 4 or 5 years old. I have double images what is the problem? Convergence problem. Replace STK 392-110, check any resistor around stk. Thank you

Question about PT-51G54 51" Rear Projection Television

1 Answer

Panasonic PT 47WX54J. Blue, green and red out of focus. Tried to adjust convergence and now have warped areas on the screen where the red and green don't align. Replace STK 392-110 with stk 392-150 ( ...

Question about PT-46G40 46 in. Rear Projection Television

1 Answer

...PANASONIC PT-NOT SETS 46G40U Convergence, has already replaced the STK 392-020 E PROBLEM CONTINUES, OK GREEN SCREEN AND BLUE SCREEN PROBLEM RED. TO ADJUST FOR TRINPOTS PART NO OTHER SETS. TEMPERATURE ...

Question about PT-56WXF95 56" Rear Projection Television

1 Answer

panasonic pt56wxf95a : had convergence problem; replaced 2 stk392; resulted in bowed image; now tv shuts itself off after high beeping sound, no front blinking. 100% Ur 2 STK convergence ICS are still

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Cindy Wells

Level 3 Expert

6688 Answers

 Grubhead
Grubhead

Level 3 Expert

5755 Answers

Are you a Televison & Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...