Questions & Answers for: stk 392 560

...focus and auto align not working,replaced 2 stk-392-560 Most times when the stk's are shorted the 5 amp cp fuse on the power supply opens. Check all of the cp's by the stk's and on the power

...stk-392-110 or stk 392-560 STK392-560 you will also likely need two 3.5 Amp pico fuses with the ICs you can get replacments with free instructions at the following link. ...

STK 392-560 to STK 392-570. When I turn it on sound comes on, no picture then off in a few seconds and timer/stanby light flashes in sequence of four. Only problem before was convergence. Suggestions?

STK 392-560 ics anymore only the STK 392-570. will these work? You can get original Sony STK392-560 chips from www.TvRepairKits.com. They have a OEM chips from Sony and come in the original Sony boxes

instead of STK 392-560, I got STK 392 570 is there gonna be a problem with that? STK392-570 is similar of STK392-560 and STK392-560 is avialble in Part Store. Click that link to see price info. Thanks

...stk 392-570 to stk 392-560 is that ok ? I would definitely stay with the original stock number. Always a good rule, unless an authorized repair is warranted. As for resistor replacement any philips, ...

...STK-392-560 CHIPS. You would need to get the board (it is on the left as you look from the back) out to replace the chips. Convergence is protected by at least 5 pico fuses---orange and are ...

...STK-392-560 convergence chips--see attached photos. Both need to be replaced and set adjusted with remote--fairly easy if you are handy. Total parts cost will on EBAY be under 25 dollars. If this ...

...STK-392-560 CHIPS for this. Both will have to be replaced and I can tell you best place to buy them and how to do the repair. Total parts cost will be under 25 dollars from the seller I use on EBAY. ...

...stk 392-560,s are there any other ones we can use Most of the time you can use a higher series as long as the first three numbers ar the same. For example, you can replace a STK392-560 with a ...