Questions & Answers for: Hitachi stk 392 040

Question about 46F510 46" Projection HDTV

1 Answer

...screen is perfect. please help needs new convergence ships, part number stk 392-040, there is 2 of them, replace them both, also check fuses on the board, you probably need a tv repairman to fix

Ad

Question about 51UWX20B 51" Rear Projection Television

1 Answer

...stk 392-110 and the 3rd one is stk 392-150 they are located on the extreme right of your tv on a long heat sink all 3 are located there.You can get replacements as well as free tech online support at ...

Ad

Question about 43FDX20B 43" Rear Projection Television

1 Answer

stk 392-150 for IK04 and IK05 come in a kit together or are they seperate? I also saw that stk 394-160e is also a replacement? Stk 394-160 are the better IC and they are available in the DP15H Upgrade

Question about 53UWX10B 53" Rear Projection Television

1 Answer

...STK 392-110 with an STK 392-150 the small value resistors will "smoke" in many cases and have to be changed with different values. The different TV Help blogs are full of people that have put in the ...

Question about 51F500 51" Rear Projection HDTV-Ready Television

1 Answer

...STK 392-110 with STK 392-180. I cant solder to well and I think I ruined the Board No picture or volume now I have checked all my suppliers and that board comes up Not Available. It must be repaired ...

Question about 50FX18B/19K 50" Rear Projection Television

1 Answer

...for the Blue Sub Yoke located near the Sub Yoke Connector should cure the problem. Most of the IC's are STK-392-110's, STK-392-120's, or STK-392-150's. Replace them as a set. Hope this helps, ...

Question about 50FX20B 50" Rear Projection Television

1 Answer

...bad (STK 392-110) Replace with the Sanyo Type STK 392-120. Also check for burned resistors in that same circuit. Check them with an ohm meter to be sure because sometimes they look OK by appearance

Question about 53UDX10B 53" Rear Projection Television

1 Answer

...is being pull to the center Hello the convergence IC's have failed and need to be replaced. the part number for the IC's are STK-392-110, have them replaced with STK-392-120 as these will last

Question about 53UDX10B 53" Rear Projection Television

1 Answer

...STK-392-110 , I suggest if you have someone replace them, that you have them use STK-392-120 instead as they work better and longer. If you take off the back of the television they are the largest ...

Question about 43F300 43" Rear Projection Television

1 Answer

...STK 392-120, upgrade to STK 392-150 thru 180 depending on what you can afford, from what I have read it's better to go with the higher number. Just search for the stk or tv model number and ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Hitachi Televison and Video Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

matt martin
matt martin

Level 3 Expert

1259 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a Hitachi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...