How to tell if front forks are bent on a 2004 yamaha royal venture I have a vibration going around curves, Also in overdrive acts like it is only running on 3 cylinders but at higher RPM seems to be ...
First off that is not how you check your "charging system" not a magneto! on these bikes you have a Stator that is in the LH side cover on that engine and you need to check the windings for continuity
Torque spec I have 2000 royal star venture and replacing the cylinderhead gaskets what is the torque for replacing the head covers?? Head bolt torque is 32 ft.-lb. (43 nm) Head cover bolt torque is 7 ...
need specs for changing rear and front tires for 2002 royal star venture including torx specs I'll include the obvious, since I'm not sure exactly what you need: Front tire - 150/80-16 Dunlop D404F or
Question about 2002 Royal Star Venture
what is the torque spec for my 1984 yamaha venture royale front wheel gonna take off my front wheel to change the tire, and can't find the torque spec. Hi, John for this scenario you will need ...
...ohm meter, one lead grounded, touch alternator pin meter should read infinity, if not replace the stator. 10. With ohm meter, both leads touching alternator pins meter should read 0.1 to 0.2 ohms
2001 yz426 clutch cover torque spec? Hi, Anonymous sorry you can't find the first and best tool you ever bought for your Yamaha despair not for a mere $0 you can download another one. For more ...
what is the min spec on plate thicknesson clutch clutchplat thichess Hi, Anonymous sorry you can't find the first and best tool you ever bought for your Yamaha despair not for a mere $0 you can ...
...stator is within specs. The battery is fully charged. What could be causing it? Hi, Roscoe before testing any electrical component in the Charging System it is "IMPERATIVE" that you have a fully ...
Usually answered in minutes!
86 Questions
59 Questions
44 Questions
34 Questions
22 Questions