Questions & Answers for: Mercedes-Benz starter fuse

no start problem starter good,no signal to starter check the brakelight fuse. ithink it is 8. the starter is on same circuit Problem is starter contact unite. battery

starter enabler fuse blows which means the starter motor does not work until fuse is changed when key is turned in ignition nothing happens ie the starter motor does not turn,,i find that the starter ...

...windows, etc.), starter not turning engine over at all. lights don't even dim when i turn the key. is there a fuse for the starter? where? bad starter jammed starter give it a knock with rubber ...

...starter motor fuse.what is the largest fuse i can replace it with? or does it need a new stater motor. Hi DO NOT put a bigger fuse in ,you need to find out why the fuse blew in the first place,it is ...

...wait a bit. Thank you If "system won't disengage when trying to start engine" means the Bendix from starter locked up with the fly wheel? If this is a case then: This is no thing to do with what you ...

...starter. Battery has plenty of juice and fuses on fuse panel all look good. IF YOU TURN IGNITION SWITCH ON POSITION GET NO DASH LIGHTS RESPONSE.IGNITION SWITCH IS BAD.IF YOU ARE GETTING DASH ...

...starter fuse blows every time ignition is turned on. Help... I replace the starter fuse (#23) and then turn the key and it blows. repeat, rinse, repeat. can't figure out why. mercedes service ...

your starter relay. Attached is a pic of your starter relay, which could also be the reason your starter isn't engaging. Also check the fuse for your starter relay and it's holder (polish off deposits

fuse blows, it means that the electrical flow is restricted and causing to much of an amperage draw. If your cables are good. Try to see what the amperae draw from your starter is. Bypass the ignition

...the starter but it wont crank w202 c200 1999 model Try checking fuse, relay of related system. Example fuel pump fuse and relay. For starter motor, check gear position is in P or N position or