...bolts. One bolt is visible on the bottom of the starter, the other you will have to feel around behind the starter for. The first step in this job is to disconnect the battery, that way when you ...
...toward lefthand side of vehicle to remove. Reverse procedure to install. Torque starter attaching bolts to 26 ft. lbs., starter bracket bolts to 22 ft. lbs. and starter solenoid terminal to 3 ft.
93 saturn twin cam starter removal i have a 93 saturn twin cam four door, im trying to remove the starter and have the bottom bolt off but cannot locate the top bolt manuel says the bolt must be ...
...starter mounting bolts. It may be necessary to raise or lower the vehicle for access to both the upper and lower bolts, but do not tighten any bolts until all of the mounting bolts have been started. ...
...starter mounting bolts. It may be necessary to raise or lower the vehicle for access to both the upper and lower bolts, but do not tighten any bolts until all of the mounting bolts have been started. ...
...starter mounting bolts. It may be necessary to raise or lower the vehicle for access to both the upper and lower bolts, but do not tighten any bolts until all of the mounting bolts have been started. ...
...before taking any wires off of the starter to prevent shorting anything .There should be 2 bolts that hold the starter in place and to bolts holding the wires on.Hope this helps you a little
i have a 1993 saturn station wagon with a 4 cylinder. I need to remove the starter for replacement what is the easiest way to do this? Hello, Disconnect the negative battery cable with a wrench. ...
...bolts holding it to the engine block, one of them is a Blind bolt, as you will only be able to feel its location on the back side of the starter. (tip, when replacing the bolt behind the starter, ...
Usually answered in minutes!
1,310 Questions
953 Questions
1,183 Questions
963 Questions
862 Questions