Questions & Answers for: Dodge starter bolts

Question about 2000 Neon

1 Answer

...starter bolts. Removestarter assembly. Disengage latch and remove solenoid connector from starter assembly. Remove battery positive connector from starter assembly. It is not necessary to remove the ...

Ad

Question about 1999 Grand Caravan

1 Answer

...the bottom bolt as youwnat to be able to turn the starter slightly to get the top bolt in. Starter Bolts are tigthen to 35 ft-lbs. Let me know if it helped or if you need additional help at ...

Ad

Question about 2002 Grand Caravan

1 Answer

...the bottom bolt as you want to be able to turn the starter slightly to get the top bolt in. Starter Bolts are tigthen to 35 ft-lbs. Let me know if it helped or if you need additional help at ...

...bolts and remove the starter. Fig. Fig. 4: Exploded view of the starter motor mounting-2.0L engine To install: Clean both surfaces of the starter motor flange and the rear plate. This is important ...

starter attachment bolts and withdraw the starter from the engine flywheel housing. On some models with automatic transmissions, the oil cooler tube bracket will interfere with the starter removal. In

...starter bolts. Remove starter assembly. Disengage latch and remove solenoid connector from starter assembly. Remove battery positive connector from starter assembly. It is not necessary to remove the ...

bolts hold the starter motor to the engine/transaxle assembly - all models Disconnect the negative (-) battery cable. Raise and safely support the front of the vehicle on jackstands. Remove the engine

Question about 1991 Spirit

1 Answer

...starter mounting bolts CAUTION Be careful when removing the starter motor mounting bolts, the motor can be quite heavy. Personal injury could result if the starter motor falls from its mounting ...

Question about 1991 Spirit

1 Answer

...bolts holding the starter are more like pins, UNLESS is it possible for the bolts holding the starter to the bell housing go through the bellhousing and into the starter? so that when myou take the ...

Question about 1999 Intrepid

1 Answer

...bolts that hold the starter in ( remember the starter only goes in one way )6. put in new starter7. put in the bolts torque the bolts to 23 ft. pounds 8. replace the power to power bolt tighten up ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

2000 Dodge Caravan
2000 Dodge Caravan

2,271 Questions

1999 Dodge Durango
1999 Dodge Durango

2,049 Questions

1999 Dodge Ram
1999 Dodge Ram

1,788 Questions

2000 Dodge Durango
2000 Dodge Durango

1,616 Questions

2005 Dodge Caravan
2005 Dodge Caravan

1,496 Questions

Top Dodge Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...