Questions & Answers for: Go Ped start

BladeZ 40cc go-ped doesn't strart... well kinda Today i got a BladeZ 40cc goped for $70 and actually it looks pretty new! Great price right? Well anyway, when i got it home it took me about 5 hours to

My Go-ped will not start I cannot get my go-ped to start. Its got good compression and everything else appears to be working good. check the coil and the fly wheel for rust or other build up it may ...

my sons goped starts and runs well with no weight on it. As soon as a person starts to ride it, it won't go and sputters. I took the engine off and looked at the clutch, and everything looks OK. Where

my engine will not stay started. i cleaned my carburator and still does not start .. it started and ran for a couple seconds then shut off and wont start again. get someone to fix

my scooter starts runs good then dies Replace the battery, after sometime the battery starts to lose it's initial capacity. For battery replacement go to Goped.com, select your scooter model, then ...

I can't get my gas powered scooter to start. The gas seems to be running through fine but it just won't click over to start when I pull on the pull cord. Sounds like you might need a new spark plug ...

it would not start check spark plug make sure the spark plug is geting good connection after replaced.

the goped was running fine then it started cutting out and now will not start. We tried pouring a little gas in the carb and will start but not run if you give it any air. Make sure you using fresh ...

My goped sport engine shut off and wont start again, what I can do? Try the steps on this website. http://goped.8m.com/racingpages/troubleshooting.html

When I put it on blocks it starts just fine , then when I set it on the ground it won't start and feels as if its tring to pull away from me, What could be causing the starting issue? I put it on ...