Questions & Answers for: sta rite sr400na spa heater

sta-rite gas heater will not go on. I have the same problem. Heater power goes on and it reads temp 126. I can adjust setting up or down. There is no service lights on, it just will not start. Part of

SR400NA will not fire. All operations seem normal, gas valve clicks loudly, but no gas flows. Igniter new this season, gas valve replace due to rusted terminal, but this is a new problem. It is ...

sta rite sr400na Max E therm heater turns on, blower runs, but no heat! sta rite sr400na Max E therm heater turns on, blower runs, but no heat, no smell of gas. Opened control board, CR8 has a red ...

Heater won't ignite and leaking water bad heat exchange probably ruined ignitor

what causes this heating element to break so quickly when heating water under 70 degrees if condenses and rains on ignitor

Sta rite sr400na led11 red Unit turns on and did not fire. Replaced ignitor per codes. With new ignitor that passed leak test, unit turns on and blows, but does not fire. Led 11 is red and led 9 is ...

Ignition control module 3 red flashes turn off reset unit see if gas ok and ignitor glows

ignitor has failed, or the heater is failing to detect that the burner has been lit. Best to get a tech on it. On this heater, that you reported the problem, and the Pentair minimax, ( in essence they

BLOWER STAYS ON SR400NA see if ignitor is lighting if not replace if ok see if voltage to gas valve