Questions & Answers for: sta rite pool heater

sta-rite lp heater wont start 4 year old sta-rite lp heater touch pad started working intermittenly. had to push pool or spa start button several times to get a start. Now nothing, no responce at all.

...sta-rite shows r 5 code when power is turned on. sta-rite pool heater sr400na. The R5 is a sequence code in the boot up sequence where your error is occuring. There is nothing in the users manual for ...

Sta-Rite Max-E 400. Pool temp is about 75 Ref: Sta-Rite Max-E 400. Pool temp is about 75 deg, but the water temp reading on the control panel climbs to the high limit (104 deg), then heater shuts down

sta-rite pool heater won't fire... my led says 126 then 125 and then back to 126...back and forth...heater will not fire! www.cheappoolproducts.com/.../Max-E-Therm-manual.pdf - United States ...

Sta-Rite Pool heater does not fire up. Error E01 displayed. I have a Sta-Rite pool heater Model SR400LP with an error code of E01. Does anyone know what this code is indicating? Heater does not fire ...

I have a e05 error code. My sr400na Sta-rite pool heater runs for 1 minute and then shuts down. Help thanks Paul Harris check the sensor that is on the exaust

new haywood pool heater to hook to sta rite mx1000 heater control box yes to firemans switch or run heater to pool hook up

pool heater shut off after five minutes Heater turns on okay, runs for five minutes, gas shuts off and pool heater turns off. check gas pressure if too low will overheat

...Sta-Rite pool heater that has a code E05 after about 45 seconds of starting Its not an overheating problem ,it goes into service heaterwhen i test it without the gas on check gas pressure if ok check ...

sta-rite pool heater Yes there is Pool Heater Sta-Rite SRC333 333 MBH ' Master Group https://www.master.ca > ... > Pool Heat Pumps Pool Heater Sta-Rite - 333 MBH - SRC333: Specifications and documents