Questions & Answers for: sta rite 42001 0096s

...failed? I have the actual control board pn 42001-0096, but the manual says this model number should have a part number 42002-007S which one is correct? Here is the link again to the Sta-rite

...model number of the heater is SR400NA, does anyone know which is correct? Not sure which one is correct but here is a link to the Pentair/sta-rite site so you can get the information. Sta-rite ...

sta-rite lp heater wont start 4 year old sta-rite lp heater touch pad started working intermittenly. had to push pool or spa start button several times to get a start. Now nothing, no responce at all.

sta-rite pool heater won't fire... my led says 126 then 125 and then back to 126...back and forth...heater will not fire! www.cheappoolproducts.com/.../Max-E-Therm-manual.pdf - United States ...

...Sta-Rite SR333NA pool/spa heater, when power is applied to heater the firem an's switch fuse blows. I have unplugged the wires feeding power to the igniter board, with the same result, the fuse blows ...

sta-rite heater was stolen, and the ID tag is blank - no model number or stats. How can I find out what I need? I recommend you call the Sta Rite technical support line at 888-782-7483 and they should

new haywood pool heater to hook to sta rite mx1000 heater control box yes to firemans switch or run heater to pool hook up

sta-rite pool heater control board fuse-what type 3 amp 240 volt

How to Upgrade from nine pin to six pin sta-rite replacement membrane Just use the six pins that line up with the connector and leave the other three alone, starting from the top of the board.

...the thermister on a Sta-Rite heater. It needs a value to compare with on the control board. If you happen to have a fixed resistor available you can use one to test the heater. 7.5k ohms should