Question about 1993 XLH Sportster 883 Deluxe
883 Sportster When I release the throttle on my 1993 Harley Davidson XLH Sportster 883, holding in the clutch, my engine shuts off. Also, the throttle does not snap back when I release it. Could be an
what sparkplug size and brand goes to a 2004 sportster (883) you can use a NGK DCPR7E
harley sportster carborator leaks gas - leaking from float bowl out of hose Your float is stuck, go to your local shop and get a rebuild (gasket) kit. Should be an easy repair just make sure your ...
...883 sportster This is not that hard to do, but it would be a good idea to purchase the HarleyDavidson Shop Manual from the dealer. Always read the complete description of the Troubleshooting section ...
...sportster 883, it seems to close on one side Look at the final drive belt. Sight along the belt as you sight a rifle. Does it look straight? If not, have you got any and all spacers in the correct ...
...883 sportster 20W50 weight oil in your Sportster for average temperature climates. Good Luck Steve Absolutely correct! I found that O'Rielly's has the 20w50 motorcycle oil for about $5.00qt. The ...
...883 sportster Go to this site http://www.bikebandit.com Choose OEM parts and locate your bike and go to wheels and brakes. The brake caliper bracket acts as the spacer on one side and the axle spacer ...
Question about 1993 XLH Sportster 883 Deluxe
spacer location for rear turn signals on 1988 sportster Hi Anonymous, inside the rubber fender gromets. Have nice day.
Question about 1993 XLH Sportster 883 Deluxe
How do you drain a float bowl on a 2004 883 sportster? remove the float bowl screws and take the cover off
ignition fuse location 94 sportster I have a 93 sportster, I hit the start button and the ignition went dead, no lights nothing I can not find a fuse it, can you help. It's more likely that your ...
Usually answered in minutes!
681 Questions
595 Questions
586 Questions
644 Questions
456 Questions