...Using the Speaker inputs, your L & R speaker cables connect from your amp (or PC speaker outputs) to the "Speaker input" terminals. The "Speaker output" terminals then connect to your
Question about WSP150 Main / Stereo Speaker
speaker output". Instead, look for another speaker output jack, such as remote speaker, B speakers, etc. You may only have one set of speaker output jacks, in which case you would need to connect your
...speaker output problem Center channel speaker output is faint and distorted. All other speaker outputs work fine. The problem is not the speaker connected to the amplifier. Hi, Check for the speaker ...
speaker output from the amp to the left speaker input on the Bose, the right speaker output on the amp to the right speaker input on the Bose, the center channel output on the amp(assuming it has one)
Question about - 5.25" 2-Way Component Speakers PCE 213 Car Speaker
Speaker output Grey & Grey with black stripe is the Fron Right Speaker output. Green is rear left Purple is rear right. I think you get that the black stripe speaker cables are the negatives. good
...output. In this case you can use the speaker outputs of the receiver to connect the subwoofer. Using speaker wire, connect the left and right channel speaker outputs of the receiver to the left and ...
Question about - 5.25" 2-Way Component Speakers PCE 213 Car Speaker
...Speaker Output (+) E2 TAN Left Front Speaker Output (+) E3 GRY Left Front Speaker Output (-) E4 LT BLU Right Rear Speaker Output (-) E5 DK BLU Right Rear Speaker Output (+) E6 BRN Left Rear Speaker ...
...Speaker B terminals for movies. No subwoofer output unless both A and B selected, resulting in all 7 speakers playing. Disconnected the A speakers, still no output from sub with only B speakers ...
output) the speaker will not operate correctly and the distortion can damage it also. Its best to get a close match. Slightly higher is better. It is important you know actual wattage output not PMPO
Question about GT4-10 Car Subwoofer
speaker on each output channel of your amp, you should be in good shape if your speaker wattage capacity equals or exceeds your amp's output rating. I've never seen speakers rated as wattage per pair.
Usually answered in minutes!
6,442 Questions
5,455 Questions
4,073 Questions
2,449 Questions
2,268 Questions