Questions & Answers for: spark santa fe

...santa fe spark plug location where are the spark plugs located on a 2003 santa fe 2.4l there are 2 covers that are over the plugs the first is the big silver and black cover that has four 10mm bolts ...

spark on my hyundai santa fe,i have replaced the coils the computer the plugs and i have cked the plugs i replaced the cam senser,is there another electronic spark control module i dont know about????

spark plugs and wires on 2003 santa fe I have a 2003 hyundai sante fe with 115,000, which I have owned since new and have maintained regularly. Do I need to change spark plugs and wires? Car runs ...

spark plugs Unless you are replacing the struts as a unit; springs and cartridge together, you will need a spring compressor to avoid dying from the coiled spring when released. If you are starting on

...from on a 2002 santa fe 4 cyl. On your Santa Fe, each spark plug has it's own "coil". the computer sends a signal to the coil at the precise moment that it needs to provide power for the spark

3.3 Santa Fe spark plug location Can't locate them A 3.5 V6 Santa Fe has direct ignition, which means each plug has a coil on top of it. I don't list a 3.3 engine for a 2003 model.

...santa fe but it turns over but wont start we replaced the crankshaft positioning sensor cam positioning sensor and the spark sensor. why no spark? There is a recall on this contact your local Hyundai ...

spark, 2004 hyundai 3.5L santa fe So I changed the cam shaft position sensor on my 04 Santa Fe which has the 3.5L V6. After changing it, it wouldn't start. I then replaced the ignition failure sensor,

...hyundai santa fe Hyundai Santa Fe cars code p035 This code refers to a misfire on cyl#5. Possible spark plug or ignition coil ( most common ). Could also be an injector or wiring to any of the ...

...spark? Santa Fe won't start. Has new plugs, plug wires and coils. It is getting gas, but not fire/spark. 2001 Sante Fe Won't Start, Cranks But No Spark. - Hyundai Forums ... ...