Questions & Answers for: spark plug gap husqvarna chainsaw

...If using another two-stroke air cooled engine oil, you should use 25:1 fuel:oil ratio. Regading the spark plug, the recommended plug is a Champion RCJ7Y with a plug gap of 0.5mm (or 0.020

...spark plug to check spark with. An old one that is black inside is likely shorted. If still no spark, replace the ignition module. Use a piece of card stock to set the flywheel magnets to module gap, ...

spark plug wire and blue wire from ignition coil, and between spark plug wire and the ground and finally resistance between blue wire and ground. Is that the spark plug wire from the ignition coil can

...If you're referring to gap settings, whatever the gap is when you get the new plug from the manufacturer will be sufficient.  You can purchase replacement spark plugs from

Husqvarna Chainsaw #41 What is the air gap for the coil? The air gap should be set to 0.3mm, the spark plug gap should be set to 0.5mm

spark plug cleaned carb Are you getting a spark..? - NO? check wiring loom from ignition module, check timing gap between flywheel and ignition module, check on/off switch.Does it have compression.? -

spark plug gap setting on a husquavarna chainsaw my chainsaw wont start I have checked everything I can think off. But I dont know the Gap setting for the Sparkplug on a Husqvarns 268 xp chainsaw Have

spark plug gap on husky 350 chainsaw huskavarna 350 chainsaw spark plug gap The plug should gap at 0.5 mm or .020" and be sure to use the proper resister plug. Do not cross reference a plug.

Oops, what is the proper spark plug gap for a husqvarna rancher 455 56cc?? .025? Per OM the electrode gap is 0.020 inch (0.5 mm).

what is the timing gap new spark plug very weak spark 36 husqvarna chainsaw A Magneto can have several issues. The magnet can be weak, the gap between the magnet and the magneto can affect this too.