...spark plug but, it will not start. I've tried testing the spark plug and it doesn't fire even though its a new spark plug.....Gas does enter the carb and the primer works and is getting gas to the ...
Question about Craftsman 36cc, 16 In. Gas Chain Saw
...Spark very weak, Unit is 12 years old and has never broken down. IS it the coil? If where is the coil located? Hello Sue; Has it ever been through a saw shop for tune up (at a good shop $40±, it ...
Question about Pro 16-Inch 38 cc Anti-Vibration Chainsaw #PP3516AVX
what is the gap on a spark plug for a 36cc craftsman chain saw? 0.020" should work well. Good luck!
Question about Craftsman 36cc, 16 In. Gas Chain Saw
...spark at the plug when it won't fire--it should be blue and snappy with a fresh plug set for 0.020" gap. If not, then remove the flywheel side cover, turn the flywheel magnets to underneath the ...
what is the gap on a spark plug for a 36cc craftsman chain saw? 0.020" works for most saws today.
Question about Craftsman 36cc, 16 In. Gas Chain Saw
...spark plug hole. have new spark plug The engine may be flooded--take the plug out, turn the saw upside down, and pull the starter rapidly a few times with the throttle full on. If flooded, a fuel ...
...spark plug, cleaned air filter etc. The I noticed: no spark at all, when I press the plug against the cylinder and pull the rope. I guess there is a magneto, capacitor and what else... What might be ...
Question about Craftsman 36cc, 16 In. Gas Chain Saw
what is the spark plug gap in358.360690 adjust with .020 to .025 that should work for you David.
Usually answered in minutes!
1,998 Questions
1,006 Questions
778 Questions
1,057 Questions
700 Questions