Questions & Answers for: Pontiac Vibe spark plug firing order

Question about 2005 Vibe

1 Answer

Firing Order? I need the firing order for 2005 Pontiac Vibe 4 cylinder 1-3-4-2, 6 cylinder 1-5-3-6-2-4 I am not sure what engines are offered in Vibe, but the firing order for all 4,6 cylinders is the

Ad

...spark plug wires off of spark plug. Aren't the spark plugs under the plastic cover on top of the engine? I see what appear to be spark plug wires that have one bolt each.After taking the bolt off I ...

Ad

SPUTTER AS IT CRANKS AND THEN NOT FIRE, LIKE A FLOODED ENGINE, BUT IT IS NOT FLOODED. HAS EXCELLENT SPARK. it is still under warrenty. take it back to the dealer

...spark plug wire from the plug and positioning it close to a grounding point, have some1 turn the motor over should see a spark if firing. if not firing you have a bad crank sensor. if that checks out ...

...Spark Plug Coil on 2003 vibe #3 coil has died three times in two weeks. The power module was replaced under warranty after the second time. Now the coil in the same location has died for a third time ...

...I have a 04 Pontiac Vibe and it started getting worse gas mileage, about 4 mpg less. I cleaned the spark plugs I bought 1 year ago and a day later the # 3 cylinder had miss fire and I switched the # ...

Question about 2005 Vibe

1 Answer

...spark plug off. get a wrench, loosen the spark plug, take it out, put a new one in where the old one was, tighten it with the wrench (snug, not super tight) and put the cap that is attached to the ...

...Spark Plug Torque 18 N·m 13 lb ft Spark Plug Gap 1.0-1.3 mm 0.040-0.051 in Spark Plug Type SK20R11 DENSO 1.8L (LV6) Firing Order 1-3-4-2 Spark Plug Torque 25 N·m 18 lb ft Spark Plug Gap ...

Question about 2003 Vibe

1 Answer

...spark then? Have you pulled a plug or two after prolonged cranking to see if plugs are wet with gas? You said pump was working, have you checked the fuel pressure? Nothing in your comment about the ...

Question about 2003 Vibe

1 Answer

...spark, good. Cylinder compression ~180psi on all 4 cyls. Tried a spare PCM Replaced cam position sensor (had previously set P0340 code) Checked and rechecked crank position sensor and cam sensor. ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

2003 Pontiac Vibe
2003 Pontiac Vibe

349 Questions

2005 Pontiac Vibe
2005 Pontiac Vibe

282 Questions

2004 Pontiac Vibe
2004 Pontiac Vibe

260 Questions

2006 Pontiac Vibe
2006 Pontiac Vibe

169 Questions

2009 Pontiac Vibe
2009 Pontiac Vibe

88 Questions

Manuals & User Guides

Loading...