Questions & Answers for: sound logic

ipod wont come on but gets hot when plugged in I sounds like you have a shorted logic board. Depending on what component on the logic board went bad it is nearly impossible to replace. It would be ...

...plugging in the 2 red/white stereo cables into the amp, and using pro logic that way. Pro logic creates surround sound, even when your show is only stereo. I guess that will do it . Have a nice

...Logic II surround sound, you must connect your cable's left/right (white/red) RCA connectors to a compatible surround receiver. For more information, see our connection page for the cable ...

I would like to connect my fantom g6 to logic and be able to play the sounds from logic through my fantom and record into logic. If you hook it up with the USB cable Logic should recognise it. You may

...sound. No picture. Caps all test good. Diodes all test good. No visible pcb burns.LCD active to touch. ICs show no abnormal temps compared to others of same on this board(s). Basics:cables are tight ...

...thing happens. sounds like a fault with the logic board. that area controls the sound and picture. if it is it will need to be replaced. look for a chip on the logic board that may have a crack in

how to reset sound logic xt netbook net-book / tablet shows start screen, but wont open menus, a lock icon in upper left hand corner says sorry i NEED TO RESET my sound logic tablet

...not pair with my sondlogic itower sound logic Turning off and on phone by tower. Have you updated ios? https://support.apple.com/en-us/HT204204 Have you tried connect it with other bluetooth

...No pic or sound. the time I don't get clicking is when logic board is unplugged. test point numbers are all good when logic board is not connected. logic board What do you think? power supply ...

is working. the sound processor is not giving output signal to amp. stereo is working pro logic not working. do let me know if you have the fix. Pro Logic cannot be decoded from a non Pro Logic source