Questions & Answers for: Sanyo sound ic

...sound comes back on...what is the deal here? If you hit your tv in on/off switch panel the swicth need to replace but if you use remote control you system IC or Croma IC are defective. If both tv ...

...tv and all of a suden there is just a horizontal line in the middle and the rest is black but still has sound. Vertical ic needs to be resoldered or replaced. where on the tv is the vertical ...

sound is ok Hello jpm1lo, your problem needs someone with some repair skills to assist you, firstly your TV has both a horizontal and a vertical circuit,your problem is in the vertical circuit. The IC

vertical line in center sanyo ds31650 If the line is "vertical" then the vertical circuit sounds OK. The problem would be in the horizontal deflection. Check yoke connection and solder around horz ...

sound. Hello, You may have a malfunctioning audio output IC. I would suggest checking the input to the IC and seeing if you have an audio signal at the input. If so then the output IC is defective, if

The pic on the tv keeps going out and will only show a line but the sound still works, how do I fix this? this tv have a cold solder in vertical ic, resolder vertical ic fix the problem.

what is the problem of my sanyo flat tv model ST-21SF1 no sound the number of IC LA42032, where in the IC's pin can i find the audio input? Check the PDF file from this link to find the info you need.

sound IF and preamap.To trace you will need to use a signal trace and injection with a voltage check on the output IC. If absent check for open fusible resisitors or if this burns out the IC

...IC. I have sound when there is no picture. Static sound. But when I put a picture on it there is no sound. This happened after changing out vertical IC. Replacing vertical output IC won't poise ...

sound is fine. View video clip of problem here, then tell me what you think. http://youtu.be/bHlRCTcHWRo Thanks. [email protected] It sounds that the synchronization separator section is faulty. In