Question about GB5108 51" Rear Projection EDTV-Ready Television
...IC N301 (TDA8351) and check or replace R370 (1ohm), R371(33ohm), and R380(1ohm). This shouldn't affect the sound but once you get video you might figure out what is wrong with the sound (control ...
...but no picture. I have tried to use all the av's and there is no picture but there is sound to all of them. Any idea's? sounds like the vertical output IC is either defective or needs to be ...
...sound works just fine to sorry not much info not to electronicly smart ANY INFO WOULD HELP Just click below for convergence repair kit; http://servicemanuals.vstore.ca/ Double images and colors are ...
Question about GB4308 43" Rear Projection EDTV-Ready Television
problem with tv APEX DIGITAL GB4308 I HAVE A PROBLEM WITH MY TV ITS LIKE A SPHERE IN THE MIDDLE GOING ACROSS IT HAS DIFFERENT COLORS RED BLUE GREEN I HAVE NOP IDEA WHAT THAT IS PLEASE HELP MY KIDS ...
...sound like an intermittent connection on the convergence IC?s. There are two and sometimes three very large IC?s that control the convergence in a big screen set. They are secured to a very large ...
Question about GB5108 51" Rear Projection EDTV-Ready Television
...could be bad and needing replacing? Thanks Tom I am not familiar with this particular set, but it sounds like you have no vertical deflection, which would mean your vertical output IC may be bad. ...
Question about GB43HD09 43" Rear Projection HDTV-Ready Television
Apex Mod# GB43HD10 The picture is now blurry or wavy. The TV was on last night when I fell asleep. When I woke up this morning, the picture on the TV had a wavy look to it, and any shapes on the ...
there's no sound the tv don't have sound. I replace the ic but no function plz check supply to the ic is ok..otherwise u should change the junle ic ...
...sound IC is faulty. You can open the TV an read the sound IC with a meter or just take the TV to a repairer to fix the problem for you once and for all. Take care. The trouble may be in the TV's ...
...sound. Any suggestions? Hello The fault may be wither to its speaker or Output IC. Check the speaker first. If there are two of them, chek the seperately. If they are found alright, the audio Output ...
Usually answered in minutes!
193 Questions
97 Questions
59 Questions