Questions & Answers for: sound sl 3 turntable

...SL-1200 Mark II); dual voltage switchable on rear of unit: 120 volts/60 Hz (U.S.) or 220 volts/50 Hz (Europe). You hopefully just spend for the cost of shipping + a restocking fee; 2. Contact 3rd ...

...turntable to the performance it had during its glory days. Good luck! ----------------- Reply to: Solution #3 posted on Feb 16, 2008 Guest Rank: Apprentice Rating: 0%, 0 votes I also have a scratchy ...

sound will also be thin and it is likely to distort on high frequencies. If the weight is too heavy, it will not jump but will definitely damage the disc. If you are a serious vinyl user, get yourself

...SL 1210 feedback/grounding problem. The problem occurs on both decks. At mid to high volume when the needle is on the record if i touch or tap anywhere on the deck u hear the tap thru the speakers . ...

Sound noize Hi .. my name is george and i have the turntable SL - 1210MK2. For months now one of the technics has a problem with the right output chanel. It sounds like the electricity noice zzzzzzzz ...

SL-BD22 turntables inner ground wire has never totally eliminated the hum buzz sound coming form player. Are there any solutions to solve this problem? I am sure it is attached to preamp properly, and

...3-turntable setup, and my basic problem is that the ground wire is too short on my (Technics) turntables. Whichever turntable is furthest away from the mixer, its ground wire cannot reach the mixer. ...

sound you speak of. You will need to have the tonearm replaced, as this cannot be fixed. Or, shall I say, it will cost you more to try and fix the problem than it will to just replace the tonearm: FIX

...sound coming from one of my turntables. I have changed the channels around and it still only comes from the same turntable. The other one is fine and there is no buzzing, but as soon as i move the ...

...sound like the pitch has been tampered with. Right you felling confer dent if so get your self a Philips screwdriver switch the deck off & unplug it under the slip mat there are two big holes put ...