Questions & Answers for: sony projector lamp cover flashing

projector up, the main Sony background image will display, and then the projector will squeal and then cut the image off and flash the lamp/cover light on and off. The lamp has less than 300 hours and

Lamp /Cover LED and Power ON/Standby LED flashes. Sony VPL-EX1 turns on for a few minutes and then the Lamp /Cover LED and Power ON/Standby LED flashes. I have cleaned the air filter and also reseated

...projector on and the lamp indicator light flashes - the projector works for about 10 seconds and displays the output image on the wall but then the on/off button flashes green constantly and it stops ...

Sony CS5 Wont turn on above projector wont turn on and the lamp/cover light is flashing even though we have changed the bulb and ensures all covers are closed, any suggestions? the cover switch is ...

...lamp The projector will not turn on as the lamp/cover light is flashing. I have replaced the bulb and the lamp cover and air filter cover are both closed properly. Any ideas ? Look closely by the ...

...lamp in projector? if yes, please make sure lamp cover is fixed properly on its position. There is safety switch under lamp cover that needs to be pressed to turn off lamp cover light flash.

...Sony VPL EX-1. I have fitted a YODN (LMP - C150) I cannot get the flashing light to go out which indicates `lamp,cover` and I cannot do anything with the projector. When you open the lamp cover for ...

Sony projector 3LCD lamp/cover blink red The sony project lamp/cover blink red without giving out any light When I plug the LCD the LAMP/COVER flsh blinking red light My Sony 3LCD projector lamp/ ...

...sony VPLAW15 projector. The lamp cover light is flashing twice repeatedly. I replaced the bulb with an OEM bulb and the problem still persists. The projector is not starting. check the fans , check ...

projector will come back on and work for a few mins again the turn on and flashing lights start again Here is a link to the manual. It states you need to replace the lamp because it has reached it end