Questions & Answers for: how to solder the display

Question about Sportster 4 SP4-TK1 Satellite Radio Receiver with Car Kit

1 Answer

...display! Can I change the broken display with the good one! Sure, you can do this if you have great soldering skills. The contacts are very small and requiring precision soldering, but a successful ...

Ad

Question about OLY-OL3000 Globe Phone

1 Answer

...with a low amp solder iron and a fine tip, re-heat the board to the display. That should solve the problem. If you were a bit sloppy with the solder, remove the solder with a fine wick and try

Ad

Question about MHC-GS100 CD Shelf System

1 Answer

...display and then solder in the new display. There are about thirty soldering points, so you will need to be able to solder really well. The alternative that I have found which works OK for me is to ...

Question about DSP-A1 Receiver

1 Answer

My DSP-A1 has the common faulty display and tried fixing it by re-soldering all the joints on the back of display PCB. Before I fixed it, all work just w/o display, but now it turned out automatically

...display and notice where the solder straps are connected to the display. This is usually the place where the solder is not making a good connection. Resolder all the point or take to an electronic ...

...display Probably a bad solder connection on the instrument panel between the led display and the circuit board itself. Instrument panel needs to be removed for this proceedure. Remove the back cover ...

...display PCB to other parts with solder. Try to find the places that expose a crack while moving the display. If none are found, look for the location(s) that are stressed when the display is ...

Question about 1999 K1500

1 Answer

...display is in red Check for any loose solder terminals at the video output board. This board can be located at the neck of the picture tube, plugged directly to it. Check all the solder terminals ...

Question about STR-D790

1 Answer

...went out comes on when you push on it If the display turns on when you push on the front panel, then you most likely have bad solder connections on the display tube. These will need to be

solder is needed. This fixes about 98% of no display problems. Every once in a while it is a chip. In this case, replace the radio. so radio plays perfectly and only RAD, DISplay background is dead>

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

5755 Answers

SmartAviator
SmartAviator

Level 3 Expert

1124 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you an Audio Players & Recorders Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...