Questions & Answers for: Volkswagen soft brake Cars & Trucks

Question about 2001 Passat

1 Answer

...soft as though there is no pressure there. The other fault is, that a wheel cylinder or some other brake componant is leeking fluid. Cheek for fluid leeks and if there are none get the pump checked ...

Ad

Question about 2004 Eurovan

1 Answer

...brake fluid level and tightening every possible nut and bolt..my brakes are extremely soft and and not functioning properly. If you have forced the caliper pistons back to quickly without taking the ...

Ad

brake pedal goes soft and then hard and then its ok check master cylinder level then check brake condition need replacement adjustment -and bleed brakes possible air in system

i changed my rear brake pads on my golf tdi 2004 and now my brake pedal is soft and spongy you need to get the brakes bled by a mechanic

soft a bit when engine runs as the servo is applying a lot more pressure its normal ,make sure you have removed the rear brake drums and adjusted the back brakes up manually and the pedal will go hard

...brake pedal is to soft when you apply it and seems like is not going to stop but it does, what is the problem? I have brand new brake discs and pads, the car doesn't have leeks on the brake ...

Question about 2002 Golf

1 Answer

brake pedal seems soft not a lot of brake its been 2 days now fluids still up but petal still feels off. Suggestions Please Thank you Terry There is air in the system. Bleed brakes but you gotta do it

Question about 2002 Golf

1 Answer

...brake pedal seems soft not a lot of brake its been 2 days now fluids still up but petal still feels off. Suggestions Please Thank you Terry If the fluid was really low you most likely need brake pads ...

...soft almost to floor/motor on//hard when motor off Either your Brake Master Cylinder or your Slave Cylinder has failed. The brake fluid is internally leaking past the piston cups. First remove the ...

...GIVE.TAKE FOOT OFF AND WHEN REAPPLY PEDAL SOFT AGAIN , WHATS LEFT TO CHANGE OR DO ????? Try bleeding the brake sys Have you checked your wheel cylinders? As worn seals in them can produce this

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...