...manually. Instead of automatic lights, the fog light indicator on the dash blinks dimmly and clicks softly (as if trying to come on) the entire time the car is running. Obiviously, this is only a ...
...and top bolt to undo remove them and gently pull the calipers back off the discs,they can hang on their own hoses they wont brake or leak,gently tap behind the discs with a soft hammer to remove ...
...soft then it gets hard again and locks up..tried bleeding ..getting it adjusted ..still has the same problem..what other causes that would do that?My mechanic replace the porporting valve, had the ...
...soft after this you should replace the brake fluid completely if it has not been done for a while as brake fluids absorbes moisture and that makes the brakes feel spongy or soft. i hope this was ...
Question about 2000 Corolla
brake bleeder screw/nipple.One method I've used on occasion is to use a copper-faced hammer (or other soft type metal drift) and hit the bleed-nipple firmly on its end once or twice. If you're
brake pedal going down (soft) when pressed (note the check p/s goes off and on; on when steering is hard. when I switch off and on the engine again the p/s become normal and it goes off the dash board
Soft pedal after bleed After Brake Bleed the pedal goes to the floor No leaks No Air In the lines? possibly bad master cylinder then If the vehicle has antilock brakes you have to do a pressurized ...
Usually answered in minutes!
1,231 Questions
1,240 Questions
1,236 Questions
819 Questions
767 Questions