Questions & Answers for: Mercury soft brake


Question about 1990 Topaz

1 Answer

replaced front driver side axle now i have no brakes and theres a soft thudding sound but car dose drive down road sounds like you didnt put the brakes or brake caliper on right. you need to recheck ...


...soft/squishy YES if too hard... drain some fluid? or check master break cil. short answer: only need to if there is something wrong. If you only replaced the pads and have not opened the hydraulic ...


brake pedal soft at times causing abs light to brake pedal soft at times when at stop light causing abs light to come on,restart light is off till next time Check your brake fluid level. might have ...

Question about 1995 Villager

2 Answers

...soft. what do i need to do to fix this? Make sure the brake hoses are not colasped and holding pressure on the brake liners,and if the hoses are fine,then replace the master cylinder. Sorry but you ...

...problem? I had it replaced last year because the pedal was too soft. thanks it may be brake pads worn out or an air leak on the servo (booser) check all the brake pads first then look at the ...

Question about 2001 Sable

1 Answer

Hi, after I drive my Mercury Sable 5 Miles, the brakes get soft and I can press the brake pedal to the floor. Brake fluid is full, what can be happen? sounds like you have a failing master cylinder

Question about 1998 Sable

2 Answers

...brake is down to the floor soft and spongy It sounds like you have a leak in your brake system. If you climb under the car and look at back sides of each tire and look for an oily film on one or more ...

...soft glide. Took it back, they drove it and then told me tires were overinflated and that gave me too much bounce on bumps? Whatever! That didn't help! I don't feel the clunk unless I go over ...

...brake pedal when off, soft to the floor when its running? That is an easy one! You have leaking break cylinders! I just had that problem.. The smallest leak will cause your pedal to go to floor when ...

...brake light comes on. The brakes are very soft. The repair place was having a hard time getting the computer reset. How do we resolve this? Take it back to the repair shop and have them re-bleed the ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Mercury Experts

gerry bissi

Level 3 Expert

4388 Answers


Level 3 Expert

85216 Answers


Level 3 Expert

5692 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides