shuttle hook The shuttle hook fell out of my 385.1551 6000 Kenmore. How do I put it back in? seems loose and falls out when bobbin is in place. I think i am missing something. Is that the bobbin ...
I need help with putting my bobbin case back in my machine Mine wasn't snapping in properly either. I took out the hook race cover and hook and put them back in. Then, the bobbin case was able to snap
oil prablem where we but the oil in the singer 1120 machine Remove the bobbin case.Snap the two retraining arms outwards.Remove the hook race cover and the hook. Oil on right hand side about 4 O'clock
Question about Drake ADA Compliant Toilet with Elongated Bowl
flapper on toilet hooks onto a plastic ?hook. one snapped off tried to remove the flapper, to rplace. old one difficult to slide off plactice 'thingy'. aflter wrestling with it, it snapped off and now
Question about 22422 Top Load Washer
hooks facing up, the hook with the longer side goes into the back. The clip will lay on the cabinet with the curved pieces facing up. Line it up and give it a downward smack with your hand. Since they
I have a Viking Classica 100 and the hook just I have a Husqvarna Viking Classica 100 sewing machine and the hook just broke, the center shaft that the bobbin case snaps on to snapped. Where can I get
Question about L-372 Mechanical Sewing Machine
Hello, I took the shuttle hook out to clean it, and now I can't get the bobbin case to snap back in. My machine has been put away for awhile, but I've never had this problem before. The manuel doesn't
Question about L-372 Mechanical Sewing Machine
...feet are snap on feet. If you look carefully at them there is a little metal bar across the top. ...
Question about L-372 Mechanical Sewing Machine
the bottom hooks on the doors have snapped, how do you install replacement hooks There are little plastic hooks on the bottom of the doors that appear to help the doors stay firmly closed. both of ...
Question about L-372 Mechanical Sewing Machine
Blakeslee A717 Commercial Mixer With 7 Quart Bowl. The snap ring on the dough hook doesn't hold. The dough hook will not stay in the shaft hole, it keeps falling out I think the snap ring is worn out ...
Usually answered in minutes!
760 Questions
764 Questions
564 Questions
565 Questions
372 Questions