Questions & Answers for: slider stuck

...slider and the lens is stuck on this lip so you cant slide it. Remove the batteries then try and slide the door open try and slide somthing between the lens and the door to free it up. This is the ...

...Stuck in some sort of scan mode and can't find how to get the entire song to play. its in intro mode. during the time a song is playing, click down the mode slider, slide it to play mode, click the ...

...stuck on the MITS startup screen and will not start Windows Mobile. No buttons will work including the on/off slider. I tried the RESET button and the same thing happened. I tried taking the battery ...

stuck brake slider pin- how to loosen grease & reuse? I usually remove the caliper, use penetrating fluid (PB Blaster) and loosen the slider pin. You buy new ones if it's too corroded where a ...

...slider is stuck,and ony goes till number 4,5,6 hi there your problem is the ribbon cable i guess thats why your slider getting stuck, thats also why only 456 number shown when your press key pad, due ...

stuck in open position; does not respond to manual or auto closing; other door is fine It's possible the fuel door was left opened when the power slider opened? Turn off the power slider switch on the

...stuck in open position Is it a power slider? What side is it? If it's a power slider it's possible the fuel door was left opened when the door was opened? If so, turn off the power slider switch on ...

do not affect temperature output. I either have cold A/C or cold vent on any fan speed setting or slider control setting. try first changing the thermostat.. maybe stuck open .. use a fail safe thermo

...stuck in the pushed position On the inner side of the brew group (The side opposite the hand grip) there is a small rectangular slider mechanism with a vertical tab that sticks out and a catch near ...

...not start or run. it does not twist in the base. How can I fix that? Sounds like the white plastic sliders that turn the motor on and off may be stuck. The sliders engage the 3 tabs on the mixer cup ...