HP Laserjet 2840 Realigned how? You have to disassemble the unit, remove the carousel assembly and align the small gears on top to the alignment marks on the big black gears. The white gears have 2 ...
HP 8150 gear noise when printing, gear noise is very loud.. tried lubind and removing main gear assy, no luck, any Ideas?? chances are there is a defective drive gear inside you need a tech to resolve
Question about LaserJet M3035xs MFP All-In-One Printer
Loud gear hum from fuser/output assembly area. It sounds more like it is coming from the output assembly or possibly the network of gears. This can also be caused by the fuser gears. Take out the ...
No error messages, but there is a loud banging noise during printing that just started. Cannot locate the source....... Could it be more like a clicking or grinding noise? That would be the swing ...
hp 2420 side wheels are troubling In this series fuser driving gears (especially 20T gear) are observed warn-out in many cases.. feeling like grinding sound, replace with 20t gear , apply grease for ...
Question about LaserJet 2420 Printer
I have an HP laserjet 2420 which has suddenly started making an alarming cracking noise when printing. I have checked the papertrays and nothing seems to be amiss. Any ideas? > Are ...
hp laser jet 4 plus gear noise Need p/n for the gear behind the fuser on the left top side. That gear is called the "fixing coupler gear" and is part number RF5-0350. You can get them here:http:
Question about LaserJet 2200dtn Printer
...ended) Old age printer, Remove right,left, back & top doors. check fuser assm screws tighten or slacked? if its slacked use more lengthy screws for tighten the fuser.Apply grease ...
...HP printers have a side guide in the paper tray. That can be adjusted to be too tight or too slack by moving the edge guide out or in. Try making it just touching the edge of the
Question about LaserJet 1200 Printer
how do I sort the knocking sound on this machine hp laserjet M5033 MFP the copier M5033 MFP is giving me a knocking sound , how do I solve it ? Knocking usually means the gears are not turning the ...
Usually answered in minutes!
1,429 Questions
1,001 Questions
724 Questions
663 Questions
593 Questions